No results.

Industrial & Food Process METAL DETECTORS

Video portfolio of reconditioned, new and used industrial and food grade METAL DETECTORs, conveyorized / belt transfer, drop-through / gravity, and liquid / pipeline metal detection systems from Alard Equipment Corporation.

See
alard-equipment.com/genlistings.htm#metal_detectors
for more METAL DETECTORs...

AND CALL 315-589-4511 to confirm availability, and to discuss your particular food process metal detection needs.

Safeline Digital Conveyorized Metal Detector, 14.75 inch high by 13.75 inch wide usable, Alard item Y1755

METAL DETECTOR - SAFELINE DIGITAL STAINLESS STEEL CONVEYORIZED WASH-DOWN METAL DETECTION SYSTEM with PUSH-OFF REJECT, 14.75 inch high by 13.75 inch wide usable aperture opening.

The all stainless steel washdown sealed search head is mounted on a stainless steel tubular frame BELT CONVEYOR. Previously used on a single belt long process line, this metal detector arrived with no belt or drive, and with 1/2 inch thick (each) UHMW sides running through the aperture, and is shown that way in our pictures of it. The overall aperture height of the search head is 16.75 inches high by 13.75 inches wide, but as it now sits, configured with thick UHMW side rails and a 1 inch UHMW bed with no belt, the AS-IS aperture opening as shown in pictures is 15.5 inches high by 11.75 inches wide (between the sides). Assuming a belt is added which is no more than 3/4 inch thick, the usable aperture height will be a nominal 14.75 inches. We assume it would be best to remove the sides to allow the full 13.75 inch width. (Thus we calculated our 14.75 inch high by 13.75 inch wide usable aperture dimensions).

The conveyor bed is now 64 inches overall length, without belt, drive or idler sprockets, and will be approximately 72 inches when completed with those. The UHMW conveyor bed sits at a 34.5 inch working height on threaded rod adjustable feet. Complete with a pneumatic push-off reject cylinder with a stainless steel reject catch tray 16 inches long by 12 inches wide by 1 inch deep. The conveyor is configured for right-to-left product flow from the operator controls position, and the push-off goes from right to left from the perspective of one standing at the infeed looking toward the discharge. Also mounted on the conveyor is a stainless steel power supply box for the metal detector. 110 volt single phase electrical input.

All food-grade sanitary stainless steel / washdown construction. Configured for vertical aperture orientation for containers, standing cartons, standing pouches, or other tall-product metal detection. This food process metal detection system has digital operator controls with product presets facilitating the fine tuning and quick changeover for multiple products.

SEE MORE about Alard Food Grade METAL DETECTORs at:
alard-equipment.com/a-f/metaldetectors/index.htm
alard-equipment.com/genlistings.htm#metal_detectors

Alard item reference #:Y1755